ENGINE MAINTENANCE

Engine maintenance is vital to keep your car or truck operating at peak performance. It also impacts the longevity of your vehicle's engine. Trust the experts at Behr Repair to help you protect your investment. Call us at 765-667-4196 or visit our shop in Gas City 46933.

These are some of the engine maintenance services we offer.

Check Engine Light
No one likes to see their car's "Check Engine" light come on. The light could mean a costly problem, like a bad catalytic converter, or it could be something minor, like a loose gas cap. At Behr Repair, we can pull the code and diagnose the problem for you. Give us a call at 765-667-4196 or stop by the shop for our expert assistance.

Diesel
Although diesel engines don't require tune-ups and tend to last longer than gasoline engines, they do require regular maintenance. Typical maintenance tasks include:

• Changing the oil & filter
• Changing the air filter
• Changing the fuel filter
• Bleeding the fuel system
• Draining the water separators
• Refilling the urea injection system

You can count on the experts at Behr Repair to help your diesel engine last a long time.

Fuel Injection
Fuel injection is a system for admitting fuel into an engine. Since 1990, fuel injectors have completely replaced carburetors as the primary means of getting gasoline into the engine. A fuel injector atomizes the fuel by forcibly pumping it through a small nozzle (under high pressure). Failure of the fuel injection system means poor performance and ultimately destroys the engine. Make sure your vehicle's fuel injection system is maintained properly. For all your fuel injection maintenance and replacement needs, call 765-667-4196 or visit Behr Repair today.

Ignition
An ignition system is a system for igniting (using an electric spark) a mixture of fuel and air in a gasoline engine. A properly working ignition system means a properly starting engine and high performance from your car. For all your ignition system maintenance and replacement needs, call or visit Behr Repair today.

Ignition Wires & Cables
Ignition cables also known as spark plug wires are an important part of your car's ignition system. They transfer the spark from the ignition coil to spark plugs that ignite the mixture of fuel and air. The mixture starts the engine. Over time, ignition wires and cables get weak and break down. This makes it impossible for the spark to reach the engine cylinders. This results in the engine misfiring. The car will eventually fail to start. If it does start, it will run poorly. Common symptoms of faulty ignition cables and wires are: poor gas mileage, engine misfires, engine light is on, and engine may vibrate. If your car needs new ignition cables and wires, call or visit Behr Repair in Gas City, IN 46933. Here, you will have the wires and cables changed by a top-rated mechanic.

Oil, Lube, and Filter
To keep running smoothly, your car highly relies on oil, lube, and oil filters. Oil helps in lubricating, cooling, and cleaning the internal engine components. With time, motor oil becomes contaminated. Your car needs an oil, lube, and filter change every three months (or 3,000 miles). When it is time for a lube, oil, or filter change, take your vehicle to Behr Repair in Gas City, IN 46933.

Spark Plugs
A spark plug delivers electric current to the combustion chamber from the ignition system. Spark plugs that haven't been changed for a long time can cause ignition problems. At Behr Repair, we have automotive experts who will check and replace your spark plugs. For all your spark plug repair or replacement needs, call 765-667-4196 or visit Behr Repair today.

Spark Plug Questions and Answers

Q: How do you know when a spark plug needs to be replaced?

A: The most common sign a spark plug needs replacing is the feeling that the car's engine is hesitating when accelerating, but other signs may include misfiring at start up, rough idling, sluggish acceleration, declining fuel economy and engine knocking.

Q: What else should I replace when replacing spark plugs?

A: If you are considering having your vehicle's spark plugs replaced, there's a high probability that your spark plug wires need changing as well. Ignition wires become brittle over time. Old ignition wires can break and cause misfires or declining fuel economy.

Serpentine Belt Question and Answer

Q: How do I know if I need to replace my car's serpentine belt?

A: If your serpentine belt is failing, you may notice performance issues with your vehicle. The vehicle may frequently overheat. Your air conditioning or power steering may fail to work or not work properly. You may notice your vehicle battery failing to recharge if the alternator is affected by a bad serpentine belt. If you start to notice any of these issues we encourage you to bring your vehicle to Behr Repair as soon as possible to avoid bigger problems and breakdown.

Check Engine Light Questions and Answers

Q: What could cause a check engine light to come on?

A: Come by Behr Repair and we can diagnose the reasons for a check engine light turning on. It can range from something serious like a faulty catalytic converter or potential engine failure to something simple like a loose gas cap or the need for a simple 50K or 100K mile manufacturer maintenance check.

Q: Is it okay to drive with the engine light on?

A: The short answer, "No." The longer explanation is the light may indicate a serious engine failure and continuing to use your car as if nothing is wrong could result in a very expensive repair bill. The check engine light means you should stop driving and have your car looked at as soon as possible by a professional at Behr Repair in Gas City.

Q: What is the most common problem with my check engine light?

A: A loose gas cap is the most common cause of a check engine light coming on. But the best method to determine why the check engine light is on is to have a professional at Behr Repair read the diagnostic code in the car's internal OBD computer.

Q: What does a solid check engine light mean?

A: A steady check engine light indicates a non-emergency issue. Come by Behr Repair and we can help.

Q: What does an intermittent flashing check engine light mean?

A: Flashing check engine lights warn of severe situations requiring immediate attention. Get your vehicle to an auto repair shop as quickly as possible or get it safely parked and call a tow truck to take it to your preferred auto repair shop.

Q: Can I turn off my check engine light myself?

A: It is a very bad idea to try to resolve a check engine light yourself. The DIY method to turn off a check engine light without a scanner is disconnect the battery cables, wait 1 minute, and reconnect the battery cables. If the underlying issue has been resolved, the light should go off. But modern automobiles rely on battery power to maintain important systems such as the O2 sensor and ADAS systems. By disconnecting the battery, you run the risk of damaging these delicate and expensive to replace computer-driven components. If your check engine light is on come by Behr Repair in Gas City. Turning off a check engine light is often inexpensive and simple.